A Guide In Masonry Repair

 

The strongest and most durable construction material for a long time has been the brick. This is true as buildings made of bricks are still here in the present day. But you need to take note that masonry also has its weakness. So if ever you will find some extensive moisture damage or crumbling bricks, it is important for you to hire the service of professionals right away. But if you will discover that the mortar joints are decaying, then you really need to do something about it. If you want to know how you can prolong and preserve the structural integrity of your brickwork, then you need to read this article.

 

First of all, you will need some toosl. You will need an angle grinder with a 4 to 4.5 inch diamond blade, as well as a rotary hammer drill that has a flat chisel head bit. You will need to make use of a flat blade that will press the new mortar to the joints, as well as a tuck and pointer trowel. A joint raker or any other similar tool will also be needed in order to shape and smooth the wet paste. A bag of mortar and a bucket is also needed for this.

 

In order to have a successful masonry repair by Plano masonry work, you need to know how bad the problem is. You will know the extent of the problem by using a house key and scratch it on the joints in the middle of the brick. You need to know that solid mortar does not crumble so if it will come out in chunks, then you really need to have it replaced. After gathering this information, it is important to use an angle grinder to create a horizontal cut below and above every joint. Once the bad sections will be removed, a hammer drill should be used to work through the grooves and chisel them out. In cleaning out the new grooves, a stiff paintbrush is highly suggested.

 

Once the bad mortar is removed, a new batch of mortar should be mixed up. The mortar will be mixed with water depending on the instructions on the bag and the final consistency of the mortar must be similar to a thick peanut butter. The trowel will be placed in the empty groove with a glob of past on top of it. The tuck pointer will be used to tightly pack the fresh mortar between the bricks. During the process of filling in the grooves with new mortar, it is important to always check if the paste is not set and hard. Normally, a new masoned joint is ready to strike after about thirty minutes of new mortar application. It is important for you to always hire the services of a Plano masonry repair professional so that you can have a successful masonry repair.